Call Us Today
Frequently Asked Questions
If you have more questions, don't hestiate to give us a call
These FAQs and tips are provided as helpful advice only; we are not responsible for any damages or injuries. If ever in doubt, always call a certified electrician.
Before attempting any work, ensure that the power is turned off to prevent the risk of electric shock.
General Questions
Aluminum wiring is still commonly used today and it is completely safe if used and installed correctly. The problem with aluminum wiring arises when not installed correctly and by not ensuring that the connections used are rated for aluminum and are terminated properly.
Older homes that were built using aluminum wiring can have some issues because contractors then did not fully understand the requirements that are inherently necessary with aluminum.
Homeowners should also be aware of any DIY upgrades that were done and ensure that the installer used the correct connectors.
A 60 amp service for your home is just fine. However your insurance company may want you to have a minimum 100 amp service. If this is the case and you need you service increased, give us a call today. We can come down and assess your needs.
Safety first! Make sure that the power has been turned off to the switch before you begin.
For a two wired switch, simply unscrew connections and make sure to match the wires up to the same sides when connecting up the new switch.
If the light switch has three wires, it is important that the wire that is on the black screw (the common screw, sometime it’s a darker copper) reconnects to the common on the new switch, otherwise the three way switch will not operate correctly.
To ensure a breaker has been reset, turn it all the way off and then back on. It should have resistance against it when you turn it to the on position. If not, there may be a problem with the breaker and you should call for service.
To reset a GFI breaker you simply need to push the rest button HARD until you hear a click and it remains down. If this does not work, then there could be a ground fault or the GFI breaker is not working correctly. If this is the case, you should call for service to get it repaired.